If the flame on your kamado grill is having trouble staying lit, there could be a few reasons for this issue. Here are some troubleshooting steps you can take:

1.Check for Airflow Issues:

·Ensure that the vents on your kamado grill are properly adjusted. Adjusting the vents controls the airflow, and having them too closed or too open can affect the flame.
·Clean any ash buildup in the bottom of the grill, as it can restrict airflow.

2.Inspect the Charcoal:

·Make sure you’re using good-quality charcoal. If the charcoal is damp or too old, it may not ignite or stay lit properly.
·Arrange the charcoal in a way that allows for good airflow. Avoid overcrowding the charcoal, as this can hinder combustion.

3.Use a Charcoal Chimney Starter:

·Consider using a charcoal chimney starter to preheat the charcoal before adding it to the grill. This ensures that the charcoal is evenly lit.

4.Check for Gas Leaks (If Using a Gas Starter):

·If your kamado grill uses a gas starter, check for any gas leaks. You can do this by applying a mixture of water and dish soap to the gas connections. If you see bubbles forming, there’s a gas leak.

5.Wind Conditions:

·Windy conditions can affect the flame on a grill. Consider positioning your grill in a way that minimizes exposure to strong winds.

6.Clean the Grill Grates:

·Dirty or clogged grill grates can impede the flow of oxygen to the charcoal. Clean the grates before lighting the grill.

7.Check for Damaged Gaskets:

·Inspect the gaskets around the lid and vent to ensure they are in good condition. Damaged gaskets can allow air to escape, affecting temperature control.


·Sometimes, it takes a bit of time for the charcoal to catch fire and establish a stable flame. Be patient and wait for the fire to stabilize.
By going through these steps, you should be able to identify and address the issue causing the flame to not stay lit on your kamado grill.

Post time: Jan-22-2024