If the flame on your kamado grill is not staying lit, there could be several reasons for this issue. Here are some troubleshooting steps you can follow to address the problem:

1.Check for Airflow Issues:

·Ensure that the vents on the bottom and top of the grill are open. Limited airflow can cause the flame to extinguish.
·Clean out any ash buildup from previous use to allow proper airflow.

2.Inspect the Charcoal:

·Make sure you are using good quality charcoal. Low-quality charcoal may not burn consistently.
·Arrange the charcoal properly, and avoid overcrowding the firebox. Allow enough space for air circulation.

3.Lighting Technique:

·Ensure that you are using an appropriate lighting method. You may want to consider using a chimney starter to ensure even ignition.
·Avoid using lighter fluid as it can leave a residual taste and may contribute to inconsistent burning.

4.Vent Adjustment:

·Experiment with adjusting the vents to find the right balance of airflow. A small adjustment can make a significant difference.
·Keep the top vent open for a clean burn, and control the temperature mainly with the bottom vent.

5.Check for Obstructions:

·Make sure there are no obstructions in the air pathway, both at the bottom and top vents.
·Ensure that the ash hasn’t blocked the airflow.

6.Weather Conditions:

·Extreme weather conditions, such as high winds, can affect the flame. Try to position the grill in a way that minimizes exposure to strong winds.

7.Monitor Temperature:

·Pay attention to the temperature inside the grill. If it’s too high, closing the vents slightly can help regulate the temperature and prevent the flame from going out.

8.Inspect Gasket Seals:

·Check the gasket seals on the grill. Damaged or worn-out seals can lead to heat leakage and affect the overall performance of the grill.

9.Troubleshoot Damper Issues:

·Inspect the dampers for any issues. If they are not functioning correctly, it can impact airflow control.

10.Consider the Fuel Source:

·If you are using wood chunks or chips, ensure they are dry. Wet or damp wood can create excessive smoke and affect the flame.
By systematically checking and addressing these potential issues, you should be able to troubleshoot and identify the root cause of the flame not staying lit on your kamado grill.

Post time: Jan-30-2024